Rheem - 697543
Rheem Prestige RTGH is a series of high efficiency condensing tankless gas water heaters designed for continuous hot water.
| Collection: |
Prestige |
| UPC: |
020352697543 |
| Width: |
18.5" |
| Height: |
27.5" |
| Depth: |
9.75" |
| Material: |
Stainless Steel |
| Warranty: |
12 years |
| Sink Length: |
1.00" |
| Fuel Type: |
Natural Gas |
| Cold Water Inlet Size: |
0.75'' |
| Heating Capacity: |
120000 Btu/hr |
| Hot Water Outlet Size: |
0.75'' |
| Install Location: |
Outdoor |
| Safetylist: |
AHRI Certified, CSA Certified, cUPC Listed, LEED Point 2 US Green Building Council Member |
| Uniform Energy Factor Uef: |
0.91 |
| Reference ID: |
7183939 |
| Shipping: |
x W:1.00"x H:1.00" 1.00 lbs. |
ADDITIONAL PRODUCT INFORMATION:
- Up to 0.94 EF with stainless steel condensing heat exchanger
- Intelligent electronic controls designed to increase energy efficiency and safety
- Exclusive! water savings setting upon activation, this setting can save homeowners up to 1100 gal of water per year by decreasing the flow of water through the pipes until the temperature reaches the heaters set temperature
- Low flow fixture compatible - industry first minimum flow rate of 0.26 gpm and minimum activation flow rate of 0.4 gpm ensures the user will receive hot water even in low demand situations
- Recirculation pump kit-ready - quickly pairs with our Recirculation pump kit to provide instantaneous hot water at the tap
- Built-in condensate neutralizer
- 1/2'' gas line compatibility on every model
- Exclusive! maintenance notice setting alerts homeowner - flashing a warning code to call for service check
- Self-diagnostic system for easy installation and service
- Digital display shows temperature setting and maintenance codes
- 2-pipe direct vent system designed for PVC pipe (up to 38'' of 3'' PVC pipe or 5'' of 2'' PVC pipe)
- Hot-start programming helps minimize fluctuation in water temperature, referred to as ''cold water sandwich'', during periods of frequent on/off operation
- Exclusive! guardian OFW overheat film wrap
- EZ-Link cable available for higher demand applications to connect two tankless units to operate as one
- Manifold up to six units with an optional MIC-6 manifold control board
- Manifold up to 20 units with the optional MIC-185 plus the MICS-180 manifold control assembly
- High altitude capability - up to 8400'' elevation above sea level3
- Digital remote control and 10'' of thermostat wire included
- Supplied with a 120 V power cord (indoor models only)
- Freeze protection to -30 deg F
- EZ-Spec sizing software - advanced online tool that takes the guess work out of sizing tankless applications
Professional delivery is available for most products we sell. We would be happy to coordinate delivery for you!
697543 - Rheem
Bay State Plumbing & Heating Supply is proud to present this decorative Natural Gas Tankless Water Heater, by Rheem. The 697543 is made from premium materials, this Natural Gas Tankless Water Heater offers great function and value for your home. This fixture is part of Rheem's Prestige Collection, so make sure to check out other fixtures to accessorize your room.
Respected For Reliability, Rheem is an industry leader for total heating, cooling and water heating solutions. In fact, Rheem is one of the few global brands with product offerings covering residential and commercial heating, cooling, conventional and hybrid storage-style water heaters, tankless water heaters, solar water heating systems, hydronic and geothermal systems, indoor air quality accessories, and replacement parts for all categories - making Rheem a one-stop Air and Water comfort solutions provider.
All Rheem products meet or exceed rigorous industry and regulatory standards for quality, reliability, efficiency, and air & water quality. From design and fabrication to finished product assembly, each phase in the manufacturing process is rigorously monitored and measured to ensure the highest quality , durability and operating excellence. Rheem products are routinely tested and certified by various government and third-party testing labs to ensure quality standards.
